The water wheel transfer machine can turn the workpiece with high efficiency and high precision, and has functions such as drilling and wire turning. Suitable for processing all kinds of metal materials, broken shaft products and plumbing and sanitary parts, simple programming, high processing precision, is the ideal equipment for processing complex shaft small parts.

When using the water wheel transfer machine, it is necessary to ensure a constant level of ambient temperature, the available ambient temperature requires 10-40 ° C, and when the ambient temperature is 20 ° C, the humidity should be 40-75%. In order to keep the static accuracy of the machine tool within the specified range, the ambient temperature is required to be 15-25 ° C, and the 24h temperature difference shall not exceed ±2.

If the voltage in the use area is unstable, the machine tool should be equipped with a voltage regulator power supply to ensure the normal operation of the machine tool. The lathe should also have reliable grounding, the grounding wire is copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.

water wheel transfer machine daily use should be away from direct sunlight, vibration and heat sources, to avoid too wet, too much dust or corrosive gas places. Corrosive gas is easy to cause corrosion and deterioration of electronic components, resulting in poor contact or short circuit between components, affecting the normal operation of equipment. Precision CNC equipment should be kept away from equipment with large vibration, such as punches, forging equipment, etc.

CNC lathes should not be stored for a long time, and the machine tool control system should be made full use of after purchase, especially in the first year of use, so that the weak links prone to failure are exposed as early as possible and can be eliminated within the warranty period. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the requirements of the air source, a set of air source evolution device (dehumidification, oil removal and filtration) should be added before the machine intake.

When there is no processing task, the CNC lathe should also be powered on regularly, it is best to power on 1-2 times a week, each time running empty for about 1 hour, in order to use the heat of the machine tool itself to reduce the humidity in the machine, so that the electronic components will not be damp, but also to find in time whether the battery alarm occurs to prevent the loss of system software and parameters.

water wheel transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html